What quota does the monitoring host have?
In building intelligent projects, the quota application of monitoring hosts is an important part of budget preparation. This article combines hot topics and industry hot spots on the entire network in the past 10 days to provide you with a detailed analysis of the quota selection and related data of monitoring hosts.
1. Basic principles for monitoring host quota application

The quota application of the monitoring host must be comprehensively determined based on the project type, equipment parameters and construction content. The following are common quota classifications:
| Device type | Quota number | Scope of application |
|---|---|---|
| Ordinary monitoring host | AZ-0132 | Analog system below 8 channels |
| Network monitoring host | AZ-0135 | Support ONVIF protocol |
| Intelligent analysis host | AZ-0138 | With AI recognition function |
| Cloud storage host | AZ-0141 | Support cloud backup |
2. The impact of recent industry hot spots on quota selection
1.Popularity of AI monitoring:As the intelligent analysis function becomes standard, the quota usage rate of AZ-0138 increased by 37% year-on-year.
2.4K Ultra HD Trends:Equipment that supports 4K resolution requires an additional 15% labor cost factor.
3.New cybersecurity regulations:Equipment that meets the GB/T 36627 standard can apply for special fixed subsidies.
| Hot technology | quota adjustment | Implementation time |
|---|---|---|
| face recognition | +8% labor cost | From 2023 |
| Thermal imaging function | +12% material fee | Pilot in 2024 |
| 5G transmission | Individual quota | Q3 2023 |
3. Analysis of Frequently Asked Questions about Quota Application
1.Multi-system integration:Monitoring hosts that integrate access control and alarm functions at the same time should be increased by 30% according to the main system quota.
2.Special environment installation:Construction in special environments such as explosion-proof and anti-corrosion requires special quota subheadings.
3.Software licensing fee:Calculated independently and not included in the equipment installation quota.
| Question type | Solutions | Reference basis |
|---|---|---|
| Cabinet installation | Another set of weak current cabinet quota | GB50303 |
| System debugging | Calculated by point | Jianbiao [2020] No. 26 |
| Recycling of old equipment | Labor cost × 0.7 coefficient | Supplementary quotas for various places |
4. The latest changes in quota standards in 2023
According to the latest documents from the Ministry of Housing and Urban-Rural Development, there are three major changes in the quota of monitoring hosts:
1. increaseGreen energy savingCoefficient: Equipment that meets the national first-level energy efficiency standards can be reduced by 3%.
2. RefinementInstallation methodCategory: Wall-mounted, rack-mounted, and embedded correspond to different subcategories.
3. Be clearOperation and maintenance servicesPricing: The first-year operation and maintenance service fee is listed separately at 8% of the equipment fee.
| Change content | old standard | new standard |
|---|---|---|
| POE power supply | Included in comprehensive unit price | separate items |
| Optical fiber access | Measured in extended meters | Per port |
| Intelligent operation and maintenance | Not clear | separate chapter |
5. Quota optimization suggestions
1. Prioritylocal supplementary quotaSpecial sub-projects for specific scenarios
2. For innovative technology applications, it is recommended to useMarket inquiry + quota calibrationhybrid pricing model
3. Pay attention to the distinctionEquipment body installationwithSystem joint debuggingvaluation boundary
By rationally applying quotas, it can be ensured that the cost preparation of the monitoring host project not only meets the specification requirements, but also reflects the true cost. It is recommended to regularly pay attention to the latest quota interpretation documents issued by the housing and construction department to keep abreast of industry trends.
check the details
check the details